✨ How to Remove Mold from Carpets | Best Cleaners in Norman, OK

a person vacuuming the carpet

Posted on July 9th, 2019

If you’ve recently experienced flooding or any other type of water damage in your home, it’s likely that you’re struggling with mold growing on and under your carpets. If that’s the case, you need an effective method to remove carpet mold and prevent it from spreading

Luckily, Happy Maids knows exactly how you can breath new life into your carpets. Not only that but we can also provide you with all the cleaning information you may need to make your home shine, from how to disinfect your kitchen sink and clean your home in two hours to how to motivate your kids to clean

And if you don’t have the time to clean the house yourself, the best cleaners in Norman, OK will gladly take care of your chores while you take a well-deserved break! 

How long does it take for mold to grow on wet carpet?

All the dust, dirt and organic matter on your carpet already make it a great place for mold to grow and spread. Once humidity enters the equation, you can expect mold to appear on your rugs and carpets in no more than a day or two after the contact with water. 

Of course, the speed at which mold will grow on your carpets will greatly depend on the nature of your specific situation. If the carpet has been in contact with water for a significant amount of time, the possibility of mold appearing will be higher, especially if your home isn’t well ventilated and already has high levels of humidity. 

How do you treat mold under carpet

The products you can use to get rid of carpet mold may differ depending on how serious your mold situation is. While many specific mold-removal products are available on the market, you most likely have some useful ingredients in your home already. 

If you’re dealing with a surface mold infestation on your carpets, you can use the following products: 

  • White vinegar: spray some on the mold-infested spot, leave it for a couple of minutes and use a stiff brush to scrub it away before it dries. 
  • Baking soda: sprinkle some on the moldy spot, let it sit overnight and vacuum it up in the morning. 

If you have mold under your carpets and not just on the surface, you can use cleaning agents that are more agressive, such as Lysol or bleach. If you’re afraid that bleach may damage your carpet or your health, mix a gallon of water with a quarter cup of bleach to dilute it.   

If you’ve experienced heavy water damage and have a mold infestation on more than 10 square feet of your carpet, EPA strongly recommends replacing the carpet or hiring professionals who use expert techniques to safely eliminate mold and prevent it from spreading. 

How do you get rid of mold smell in carpet?

Once you’ve successfully removed the mold from your carpet, you need to dry out and vacuum the area thoroughly to make sure no mold spores are left behind and get rid of the musty odor. If possible, rent a HEPA vacuum to filter out the spores and eliminate the smell. 

The following products can also help you remove the mildew smell: 

  • Hydrogen peroxide/water solution 
  • Vinegar/water solution
  • Baking soda
  • Carpet shampoo        

Rely on the best cleaners in Norman, OK and forget about mold

While the above-mentioned methods are more than likely to work for light and moderate mold infestations, a severe mold problem is best left to professionals. And who could be better for the job than the cleaning experts HappyCleans can match you with? 

Rest assured that they will take care of your mold problem with unrivaled expertise and professionalism while you use the time to visit the Fred Jones Jr. Museum of Art. Reach out to them today and enjoy fresh smelling carpets once again!